Will “The EvCC Strict Coder Guru”

Recently with a switch on campus to VoIP, IT has been involved in getting the network ready and distributing the new Cisco IP Phones. So I have some sneek peek at the new phone.

Also, I have decided to give you a quick look at the setup to connect the phone. Cisco also provided a quick reference guide.

Connection Steps:

1. Connect phone cord between the phone and handset (small end to the handset)
2. Connect the Ethernet cable from the wall port to the “10/100 SW” port on the bottom of the phone
3. Connect the provided Ethernet cable from the phone port “10/100 PC” to the Ethernet port on your computer
4. Once Configured, enter the Call Manager config code and enter the appropriate extension number
5. Done!

Here is the Phone: